Impact of Palm Oil Methyl Ester Drops on a Surface 机翻标题: 暂无翻译,请尝试点击翻译按钮。

会议集名/来源
Advances in Mechanical Engineering: Select Proceedings of ICRIDME 2018, Set 1
出版年
2020
页码
13-19
会议地点
Shillong
作者单位
Department of Mechanical Engineering, Indian Institute of Technology (ISM)Department of Mechanical Engineering, Indian Institute of Technology (ISM)Department of Mechanical Engineering, Indian Institute of Technology (ISM)
作者
Vikas Kumar;Ramesh Kumar Singh;Deepak Kumar Mandal
摘要
The impact of palm oil methyl ester drops of various sizes on a PMMA surface at normal temperature and pressure is reported. The entire process of impact of a desired drop, falling from a given height, on the surface, was recorded using a highspeed camera. Drops of three different sizes were tested for three impact heights (4, 8, and 12 cm). Various subprocesses were observed. Upon impact, the drop spreads, followed by negligible recoil and partial rebound. The results show that, for a drop of a given size, the maximum spreading diameter increases with the increase in the impact height, which raises the kinetic energy, causing the drop to spread. At the initial phase, the inertia force dominates over the viscous and surface tension force, until the drop reaches its maximum spreading diameter. As the drop spreads, a ring was observed to form around the periphery. Upon reaching the maximum spread, the inner edge of the rim starts to recoil toward the center whereas the outer edge remains almost stationary. This results in the increase in the thickness of the rim. The larger resistance between the substrate and drop, i.e., adhesion, dominate over the available forces required for recoiling. The lower value of the surface tension and viscous force cannot recoil the drop back. The resistance increases with increase in the Weber number, because the increase in the spread diameter raises the adhesion. Hence, the rebound height decreases with increase in the impact height for a given drop.
机翻摘要
暂无翻译结果,您可以尝试点击头部的翻译按钮。
关键词
Drop impact;Spreading factor;Weber number;Wettability
若您需要申请原文,请登录。

最新评论

暂无评论。

登录后可以发表评论

意见反馈
返回顶部