Effect of Catalysts on the Properties of Fluorinated Polyurethanes 机翻标题: 暂无翻译,请尝试点击翻译按钮。

会议集名/来源
Proceedings of 2013 International Conference on Intelligent Materials and Mechatronics(IMM 2013)
出版年
2013-11
会议地点
Hong Kong,China
作者单位
School of Life and Environmental Sciences, Shanghai Normal UniversitySchool of Materials Science and Engineering, University of Shanghai for Science and TechnologySchool of Environment and Architecture, University of Shanghai for Science and Technology
作者
Zan Li;Xia Wang;Ying Li;Wei Chain;Jiaojiao Hu
摘要
Fluorinated polyurethanes(FPU) was prepared using fluorinated polyether polyol(FPO) as the soft segment, 4,4`-diphenylmethane diisocyanate(MDI) as the hard segment, 1,4-butanodiol(BDO) as the chain extender and catalysts. Tin metal catalysts were used to catalyze the polyurethane reaction of polyether polyols and isocyanate. The effect of different catalysts including stannous octoate(T-9) and dibutyltindalautrate(DBTDL) on the structure, surface properties and thermal properties of FPU was studied. The structural elucidation of the synthesized FPU was performed by Fourier transform infrared(FT-IR) and discovered that with decreasing catalyst efficiency or without catalyst, the strength of hydrogen bounds were enhanced. The FPU films surface was characterized by contact angle(CA) and atomic force microscopy(AFM) and it was found that the phase separation was increasing with increasing catalyst efficiency. The thermal property was exhibited by Thermo gravimetric(TG) and showed that joining catalyst improved stability significantly.
机翻摘要
暂无翻译结果,您可以尝试点击头部的翻译按钮。
关键词
FPU;Different Catalysts;Properties
若您需要申请原文,请登录。

最新评论

暂无评论。

登录后可以发表评论

意见反馈
返回顶部