(KR101778811) 1. Could be connected to drive won could be connected to the input department and differential gear as the vehicle transmission module which had the output department, - By the clutch housing the first clutch part which is connected to the minute description input department to be formed, by the clutch plate the clutch which has the fabrication cylinder where together as for under pressing to include a pressure means, this pressure means is connected the second clutch parts which are formed and these two clutch parts to movable pressure element and this movable pressure element; - To include the rotary absence at least 3, the first sashimi former absence to be connected among the rest to minute description first clutch part, the second sashimi former absence be connected to the brake, 3rd former absence the meteor gear equipment which is combined to minute description output department. And - Has the transmission housing, meantime, includes the input shaft and the output shaft, and the minute description input shaft is connected to second clutch part, gear hwi which is arranged to on the minute description output shaft be minute description output department as for under forming the transmission The low of including is in a transmission module, Between the space of the minute description transmission housing and as for under existing to include the partition which is connected with a situation to the transmission housing, minute description space is damp space, and within this space the minute description meteor gear equipment as for under existing the transmission module thing with feature. 2. Is in first, port the minute description first sashimi former absence between the input shaft of the fabrication cylinder and the transmission is connected to the clutch housing the transmission module the fact that with feature. 3. First port or there to be in a second, port with minute description first sashimi former absence in between the fabrication cylinder first sealing up addition be located, the minute description first sashimi former absence and to between the input shaft of the transmission as for under second sealing up addition being located the transmission module thing with feature. 4. First port or is in second, port as for the fabrication cylinder of the minute description clutch is connected to the partition the transmission module the fact that with feature. 5. First port or is in second, port the minute description partition to between the clutch housing and the meteor gear equipment as for under being located the transmission module thing with feature. 6. First port or there is in a second port, and minute description transmission module to include the oil pipe or the air pipe more, as for this pipe from end is connected to the fabrication cylinder meantime, within the partition or to on the partition the low of existing the transmission module thing with feature. 7. First port or is in second, port also the minute description clutch within damp space as for under being located the transmission module thing with feature. 8. First port or there to be in a second, port minute description 3rd time former absence second gear hwi passing which attaches to the output shaft of the transmission first gear hwi which goes in gear be to attach, this first gear hwi be to on the input shaft of the transmission through the bearing to on the first sashimi former absence which is affixed through the bearing is affixed the transmission module the fact that with feature. 9. There is in a 8th clause, and second gear hwi be gear hwi passing which last speed change grade is additional in order to be able to go in gear directly, the transmission module the fact that with feature. 10. First port or there will be in a second port, and as for the minute description transmission as for under forming gear deceleration grade at least 2 as for under including meantime, the minute description 3rd former absence could be combined a gear grade respectively as selectively as more than one in gear deceleration grade the transmission module the fact that with feature. 11. There to be in a 10th clause, first gear hwi of one in minute description gear grade be to be fixed attached to the input shaft, first gear hwi of different gear grade be the input shaft free Roy will be able to rotate in the center, meantime, the input shaft or could be combined as selectively as 3rd former absence the transmission module the fact that with feature. 12. Will be in 10th clause, minute description 3rd time former absence lowest gear grade of the transmission or first gear hwi of highest gear grade be as could be combined as selectively the transmission module the fact that with feature. 13. There to be in a 12th clause, first gear hwi of minute description lowest gear grade be to be fixed attached to the input shaft, first gear hwi of minute description highest gear grade be the input shaft free Roy will be able to rotate in the center, meantime, the input shaft or could be combined as selectively as 3rd former absence the transmission module the fact that with feature. 14. Is in 13th clause, minute description 3rd former absence free hwi the bearing be (freewheel bearing) through is connected to the input shaft the transmission module the fact that with feature.
最新评论
暂无评论。