Synthesis of metal catalyst carbon nanotubes by arc-discharge method used for energy efficient applications 机翻标题: 暂无翻译,请尝试点击翻译按钮。

会议集名/来源
International Conference on Sustainable Engineering and Technology (iConset 2018): Karnataka(IN).19-20 April 2018
出版年
2018
页码
020072-1-020072-6
会议地点
Karnataka
作者单位
Department of Mechanical Engineering, Sree Buddha College of Engineering, Alappuzha, Kerala-690529, IndiaDepartment of Mechanical Engineering, SBM College of Engineering and Technology, Dindigul, India-624005, IndiaDepartment of Mechanical Engineering, Sree Buddha College of Engineering, Alappuzha, Kerala-690529, IndiaDepartment of Metallurgical and Materials Engineering, National Institute of Technology, Tiruchirappalli-620015, IndiaDepartment of Metallurgical and Materials Engineering, National Institute of Technology, Tiruchirappalli-620015, IndiaDepartment of Metallurgical and Materials Engineering, National Institute of Technology, Tiruchirappalli-620015, IndiaDepartment of Mechanical Engineering, Sree Buddha College of Engineering, Alappuzha, Kerala-690529, India
作者
M. S. Senthil Saravanan;T. Nagaraj;Sreejith Mohan;Shiva Rama Krishna Singh;K. Sivaprasad;S. P. Kumaresh Babu;J. B. Sajin
摘要
In the present study, synthesis technique of metal powder filled carbon nanotubes is reported. Metal powders such as copper and nickel were used a substrate for growth of nanotubes. The technique adopted for the synthesis was modified arc discharge method using SMAW. Two graphite rod of high pure was used as anode and cathode on same polarity with current capacity of 150A and 20V. During arcing, soot with CNTs and other nanoparticles were deposited on cathode. After physical and chemical purification process, high purity carbon nanotubes can found. The characterization techniques used to reveal the structure of CNTs are XRD and TEM was employed. The synthesized CNTs find application in Energy storage applications such as battery and fuel cell.
机翻摘要
暂无翻译结果,您可以尝试点击头部的翻译按钮。
若您需要申请原文,请登录。

最新评论

暂无评论。

登录后可以发表评论

意见反馈
返回顶部