(CN106222986) 1. Automatic System prototype, characterized in: it comprises a console, Out molds mechanism, a steering mechanism that mechanism Out molds, Die assembly; Out molds mechanism into a front platform and rear platform by table; Out molds mechanism comprises upper rollers, lower rollers, drive mechanism, the top roll, bottom roll up and down oppositely disposed, the distance between the upper roller and the lower roller assembly is slightly smaller than the height of the Die, lower roller or upper roller drive mechanism drives the rotation, the drive mechanism controlled by the controller action; Out molds mechanism a steering mechanism that includes a sensing switch, a controller and a reset switch, the sensing switch is provided in the cabinet of the rear platform assembly is advanced direction Die, sensing switch and the upper roller, the distance between the center position of the Die is smaller than the lower roller between the length of the assembly, the controller receives the sensing signal is generated to turn the drive mechanism of the rotational direction, the controller controls the drive mechanism through a reset switchback to original rotating direction; knife mold assembly includes Die, Die Die Box of the housing, the cover plate, are arranged in a longitudinal and transverse directions as the blade in Die a set of blades, blade Mold set in the cartridge for Die, Die Die Box top end slightly to expose the upper plane, on the cover plate covers the Die; sampling time, Die sample is placed on the top, the cover cap on the sample, and then the upper roll is placed in the blade mould, the lower roller between, upper or lower roller is rotated through the drive mechanism drives the controller to activate, the upper roll by the cutter die assembly, the lower roll after extrusion, the cover plate to press the sample into the sample in the Die Die cut to size, and then to the induction switch to sense the continuing forward after the knife die assembly, the sensing switch provides a signal to the controller controls the drive mechanism is reversely rotated, to the original position after the reverse movement of the knife die assembly through the controller stops the driving mechanism is actuated, then removed Die assembly, a sample was taken from Die, and then the reset switch through the controller will return to the original state in the driving direction drive mechanism.
最新评论
暂无评论。